ClearFox® DAF

Dissolved Air Flotation

The ClearFox® DAF is a modular unit, designed for highly efficient treatment of any type of industrial wastewater. With advanced technology, we can achieve higher removal rates of pollutants than competitor products. The ClearFox® DAF is a flexible solution that can be applied to a wide range of wastewater applications. Capacities range from 1 m³/hr to 250 m³/hr. Containerised DAF solutions are modular and can be installed as standalone solutions or as pretreatment in a wastewater treatment plant with other process steps.

GET IN TOUCH NOW

Fill out this field
Please enter a valid email address.
Fill out this field
Fill out this field
You need to agree with the terms to proceed
Select an option
dissolved air flotation for process waterclearfox daf

Advanced physical and chemical treatment process

COD removal of up to 85%, BOD removal of up to 85%, Oil removal of up to 99%, TSS removal of up to 95%.

DAF systems are high efficient for cleaning wastewaters from industrial and production processes such as:

  • Meat processing / Slaughterhouses
  • Fish processing
  • Dairy factory / Milk production
  • Wine / Juice production
  • Breweries
  • Canning factory
  • Commercial kitchen / Canteens
  • Restaurants
  • Cosmetics production
  • Food transport company
  • Chemical industry
  • Pharmaceutical industry
  • Petrochemical industry
  • Textile industry
  • Paper industry
  • Municipal wastewater cleaning
  • Plastic recycling industry

ADVANTAGES

The ClearFox® dissolved air flotation series is characterized by its extremely robust, space-saving design. It can be supplied skid mounted or fully containerized. The great success of this technology is based on its simple and cost-effective operation. Modular DAF units have been installed in many major European food producing facilities and industrial wastewater applications globally. The ClearFox® DAF modules can be supplied with other ClearFox® modules as part of a larger solution or as standalone solutions.

Benefits of the ClearFox® flotation technology are as follows:

  • Highly efficient in COD/BOD/FOG reduction (up to 99%)
  • FOG removal in food and beverage industry
  • Self-cleaning patented design (no mechanical scraper required for many applications)
  • Two stage DAF – not just single stage like standard DAF systems
  • Integrated feed pump
  • pH adjustment and flocculation system
  • Lower chemical requirements than standard DAF systems
  • Made from polypropylene and high-density polyethylene which has a higher resistance to many liquids/chemicals when compared to steel
  • Suitable for high TDS wastewater
  • Totally automatic operation
  • Standardized manufactured models
  • Compact design with smaller footprint than standard DAF systems
  • Clog-free saturation system
  • Pre thickened flotation sludge produced
  • Easy to service
ClearFox DAF for wastewater treatment

THE PROCESS TECHNOLOGY

The ClearFox® dissolved air flotation plant is fully automatic. A helical rotor pump feeds the water from the onsite equalisation or collection tank to the reactor.
The wastewater flows through a pH-regulation system, where pH-fluctuations are adjusted. Then, wastewater flows continuously into the DAF reactor. Additives are mixed in a polymer preparation station in order to aid the flocculation and flotation process.

These flocculants are mixed automatically with the inflowing waste water. A multiphase pump saturates the outlet of the water continuously with air, which is then recirculated into the reactor. The pressure release causes a flotation of the floatable particles. These accumulate in the upper section of the reactor and are separated by a self cleaning process, or with a scraper for special applications. Flotation sludge is removed via a cone-shaped opening with compressed air.

ClearFox DAF solution for wastewater treatment

Operation:

The plant is fully automated and depending on the wastewater flow, a high-quality effluent is achieved at all times. The system is very robust, and uses no cleaning devices with movable chains or scrapers (needing lubricants etc.), that require constant maintenance. The Systems have proven their reliability in many industries over the years, particularly in the food industry.

Cleaning efficiency:

The Cleaning-efficiency depends on how high the degradation rate of the waste water is and operator behavior.

The effluent is largely free from fats and oils, and is purified to an indirect discharge quality, allowing direct discharge to a sewer. Typical effluent standards are as follows:

  • pH 6.5 – 7
  • COD 1.000 mg/l,
  • BOD 500 mg/l
  • TSS 100 mg/l.

There is no change in temperature as a result of the process, and the effluent quality is suitable for biological post-cleaning.

ClearFox DAF for industrial wastewater treatment
ClearFox flotation

Installation:

The DAF (Dissolved Air Flotation) System includes:

  • flotation reactor
  • feed pump eccentric screw for inflow
  • feed pump eccentric screw for sludge feed
  • small interim sludge storage tank
  • dosing / mixing line
  • polymer mixing station
  • dosing pumps (2 x)
  • suction lances for chemical canister
  • multiphase pump
  • pH neutralization
  • room aerator and heater (frost protection)
  • control unit

If not installed in a container, the scope of supply consists of three parts that can be set up freely and are mounted on skids. These parts (pump station, flotation station, dosing station), as well as the control cabinet, can be easily transported with forklifts.

The base area for the system components must be firm and level (foundations), the environment dry, covered, dew protected; in closed structures with multiple air changes according to the regional regulations.

Consumer materials:

In order to regulate the pH in the water, acids or alkalis are added into the wastewater. The DAF also has a metering system flocculants and polymers. The specific consumption is determined in the laboratory by jar test and this is optimized by us after the start up of system.

Residues, sludge:

In the ClearFox® dissolved air flotation system, fats and oils along with other dissolved substances which are extracted, are removed from the wastewater as flotation sludge. The resulting amount is dependent on the concentration of such substances in the wastewater. It can be assumed that about 40 to 60 liters of flotation sludge per m³ of wastewater are produced at average concentrations. This is approximately 4 to 6 % of the volume of the waste water entering the DAF system.

The flotation sludge further dehydrates during storage, thus the longer it is stored, the less water content the sludge has. It is recommended to use enclosed structures /systems to avoid odour problems.

Read More About ClearFox® DAF Projects

Speak to one of our team today